设置卡盟服务器

H3CER2100n/ER3108GW商业营销平台开局指导书Copyright2015杭州华三通信技术有限公司版权所有,保留一切权利.
非经本公司书面许可,任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部,并不得以任何形式传播.
本文档中的信息可能变动,恕不另行通知.
i目录1产品概述·························································································································11.
1产品特点······················································································································11.
2产品外观······················································································································11.
3前面板·························································································································11.
4后面板·························································································································21.
4.
1··························································································································32设备管理·························································································································32.
1Console方式管理··········································································································32.
2Telnet方式管理·············································································································42.
3Web方式管理···············································································································42.
3.
1有线方式·············································································································42.
3.
2无线方式·············································································································43无线设置·························································································································13.
1桥接模式······················································································································13.
2隔离模式······················································································································24商业WIFI设置·················································································································25注意事项·························································································································85.
1开局软件版本················································································································85.
2忘记登录密码················································································································95.
3恢复出厂设置················································································································95.
3.
1通过命令行恢复出厂设置························································································95.
3.
2通过WEB恢复出厂设置·························································································911产品概述1.
1产品特点该款路由器采用专业的64位网络处理器,同时配合DDRIIRAM进行高速转发.
并且支持丰富的软件特性(比如:IP流量限制、策略路由、ARP绑定、ARP防护、防攻击、QQ/MSN应用限制、IPSecVPN等功能),同时提供非常简便、易操作的Web设置页面,可以帮您快速地完成各功能特性需求的配置.
1.
2产品外观图1-1产品外观1.
3前面板图1-2前面板(左ER3108GW右ER2100n)(1):USB接口(2):电源指示灯(3):Diag指示灯(4):WAN接口状态指示灯(5):LAN接口状态指示灯(6):2.
4GWLAN接口指示灯(7):天线接口ER3108GW面板参数含义2(1):WAN接口(2):LAN接口(3):WAN接口状态指示灯(4):LAN接口状态指示灯(5):Diag指示灯(6):电源指示灯(7):Console口(8):WLAN接口指示灯(9):天线接口ER2100n面板参数含义1.
4后面板图1-3后面板(左ER3108GW右ER2100n)(1):接地柱(2):电源接口(3):LAN接口(4):WAN接口(5):CONSOLE口ER3108GW面板参数含义(1):电源接口(2):接地柱ER2100n面板参数含义32设备管理2.
1Console方式管理H3CER2100n/ER3108GW可以通过面板上的Console口登陆设备并通过命令行进行简单管理,ER2100n/ER3108GW的所有功能项均通过WEB完成配置,命令行只作为简单的维护用.
对设备进行功能设置请使用WEB方式进行配置.
使用Console线连接ER2100n/ER3108GWConsole口,其串口参数与管理H3C主网络设备设置相同.
将管理计算机的串口通过配置线缆与设备的Console口相连.
配置串口属性图2-1后面板disversionHardware:VER.
ABootrom:0.
1.
0.
1Software:ER3108GW100R00742.
2Telnet方式管理系统缺省启用Telnet功能,缺省用户名密码均为admin.
2.
3Web方式管理2.
3.
1有线方式1.
客户端计算机要求确认计算机已安装并启用了以太网网卡.
确认计算机已和设备的LAN口相连(有线方式).
2.
设置客户端计算机的IP地址建议您将计算机设置成缺省的"自动获得IP地址"和"自动获得DNS服务器地址",由本设备自动分配IP地址.
如果您想给计算机指定静态IP地址,则需要将计算机的IP地址与设备的IP地址设置在同一子网中(设备的缺省IP地址为:192.
168.
1.
1,子网掩码为255.
255.
255.
0).
3.
确保管理计算机和设备之间的网络连通,可通过在管理PC上ping设备管理地址测试.
4.
打开浏览器,关闭浏览器的代理服务器,在地址栏输入http://192.
168.
1.
1,登录到设备web界面,输入用户名和密码登录,默认用户名为admin,密码为admin.
2.
3.
2无线方式1.
客户端计算机要求确认计算机已安装了无线网卡,并处于开启状态.
将计算机放置于本设备的无线网络范围内.
2.
设置客户端计算机的IP地址建议您将计算机设置成缺省的"自动获得IP地址"和"自动获得DNS服务器地址",由本设备自动分配IP地址.
如果您想给计算机指定静态IP地址,则需要将计算机的IP地址与设备的IP地址设置在同一子网中(设备缺省IP地址为:192.
168.
1.
1,子网掩码为255.
255.
255.
0).
3.
设置无线客户端在"无线网络连接"列表里找到需连接的无线网络,缺省情况下,设备提供一个名为"H3C"的无线网络,不加密,关联此SSID即可连接成功.
4.
确保管理计算机和设备之间的网络连通,可通过在管理PC上ping设备管理地址测试.
5.
打开浏览器,关闭浏览器的代理服务器,在地址栏输入http://192.
168.
1.
1,登录到设备web界面,输入用户名和密码登录,默认用户名为admin,密码为admin.
13无线设置3.
1桥接模式页面向导:无线设置→无线AP设置→基本设置SSID1和新增SSID的工作模式默认为桥接模式,在该模式下,内部用户(主要指企业内部员工)使用内部网络,可以访问外网资源,也可以内部员工之间通信,访问企业内部资源第一个SSID,默认名称H3C,并工作在桥接模式下,可根据实际情况对其进行修改.
图3-1设置无线网络基本属性图3-2设置加密方式23.
2隔离模式SSID2的工作模式默认为隔离模式,在该模式下,外部用户(主要指造访企业的外来人员)使用客人网络,可以访问外网资源,但不能访问企业的内部网络资源SSID-2缺省启用,并工作在隔离模式.
图3-3设置SSID2图3-4设置SSID2属性4商业WIFI设置一、平台介绍及认证前期准备34.
1页面向导:云WIFI→云WIFI设置→注册图4-1注册商业WIFI4.
2点击注册新帐户,如果之前注册过,直接输入用户名密码即可.
图4-2I注册新帐户4图4-2II注册新帐户4.
3输入之前注册的新帐户和密码,点击注册激活.
图4-3激活新帐户54.
4点击H3C云平台网站,进入云平台图4-4进入云平台4.
5修改认证模式.
按钮呈蓝色表示该认证模式处于激活状态.
图4-6修改认证模式二、短信认证,免认证设置(1)可以对短信认证,免认证模板进行预览、启用、添加、编辑、删除等操作.
6图4-7对模板进行修改[可选](2)可以对短信认证,免认证模板选择不同的设备类型和portal类型图4-8对模板进行修改二、微信认证设置(1)配置微信认证,定制上网页面.
注意:此处SSID与设备SSID2保持一致.
7图4-8微信认证设置图4-9商业营销平台和微信公众号关联图4-10查看设备信息8图4-11查看访客信息图4-12修改个人信息5注意事项5.
1开局软件版本开局设备建议统一升级至H3C官方网站提供的最新版本或咨询H3C技术支持人员.
95.
2忘记登录密码若忘记登录密码可通过串口进行修改,修改方法如下:passwordChangingpasswordforadminEnterthenewpassword(minimumof1,maximumof31Englishcharacters)Enternewpassword:Re-enternewpassword:Passwordhasbeensetsuccessfully.
说明:通过telnent登录设备,无法修改密码,仅在串口才能修改.
5.
3恢复出厂设置若要对设备进行恢复出厂设置,可通过命令行或者WEB进行恢复:5.
3.
1通过命令行恢复出厂设置通过串口登录设备restoredefaultThiscommandwillrestorethedefaultconfigurationandrebootthesystem.
Thecurrentconfigurationwillbelostifyoucontinue.
Continue[Y/N]y5.
3.
2通过WEB恢复出厂设置登录设备WEB管理页面,页面向导:设备管理→基本管理→配置管理图5-1恢复出厂设置说明:恢复出厂设置前,请进行配置备份.