组件www.q.com.cn

LMP90080-Q1www.
ti.
com.
cnZHCSC22A–MAY2013–REVISEDJANUARY2014具具有有后后台台校校准准的的LMP90080-Q1多多通通道道16位位传传感感器器模模拟拟前前端端(AFE)查查询询样样片片:LMP90080-Q11特特性性应应用用2316位位低低功功耗耗三三角角积积分分(Σ-Δ)模模数数转转换换器器(ADC)温温度度和和压压力力发发送送器器所所有有增增益益上上的的真真连连续续背背景景校校准准应应变变仪仪接接口口使使用用期期望望值值编编程程进进行行适适当当的的系系统统校校准准工工业业过过程程控控制制低低噪噪声声可可编编程程增增益益(1x-128x)说说明明连连续续后后台台开开路路/短短路路和和范范围围外外传传感感器器诊诊断断LMP90080-Q1是一款高集成、多通道、低功耗16位单单周周期期稳稳定定的的8个个输输出出数数据据速速率率(ODR)传感器AFE.
此器件特有一个精密16位三角积分模源源自自100A至至1000A的的2个个已已匹匹配配激激励励电电流流数转换器(ADC),此转换器具有一个低噪声可编程增4个个差差分分(DIFF)/7个个单单端端(SE)输输入入益放大器和一个完全差分高阻抗模拟输入复用器.
一2个个DIFF/4个个SE输输入入个真连续后台校准特性可在所有增益和输出数据速率上7个个通通用用输输入入/输输出出引引脚脚实现校准而又不会中断信号路径.
后台校准特性在温用用于于实实现现低低偏偏移移的的斩斩波波稳稳定定缓缓冲冲器器度和时间范围内从根本上消除了增益和偏移误差,从而支支持持循循环环冗冗余余码码校校验验(CRC)数数据据链链接接误误差差检检测测的的在不损失速度和功耗的情况下提供测量精度.
SPI4/3线线制制接接口口ODR≤13.
42SPS时时的的50Hz至至60Hz线线路路扰扰动动抑抑LMP90080-Q1的另外一个特性是其连续后台传感器诊制制断,此诊断可在无需用户干预的情况下实现开路和短路每每通通道道独独立立增增益益和和ODR选选择择情况以及范围以外信号的检测,从而提高了系统可靠由由WEBENCH传传感感器器AFE设设计计工工具具提提供供支支持持性.
自自动动通通道道排排序序器器两组独立外部基准引脚可实现多个比率测量.
此外,在LMP90080-Q1上还提供两个已匹配的可编程电流主主要要技技术术规规格格源来为诸如阻性温度检测器和桥式传感器等外部传感器有有效效位位数数(ENOB)/NFR::高高达达16/16位位供电.
此外,还提供了7个GPIO引脚与外部发光二偏偏移移误误差差((典典型型值值))::8.
4nV极管(LED)和开关进行对接以简化绝缘格栅上的控增增益益误误差差((典典型型值值))::7ppm制.
总总体体噪噪声声::VA),thecurrentatthatpinmustbelimitedto5mAandVINhastobewithintheAbsoluteMaximumRatingforthatpin.
The20mApackageinputcurrentratinglimitsthenumberofpinsthatcansafelyexceedthepowersupplieswithcurrentflowtofourpins.
4Copyright2013–2014,TexasInstrumentsIncorporatedLMP90080-Q1www.
ti.
com.
cnZHCSC22A–MAY2013–REVISEDJANUARY2014OperatingRatingsAnalogSupplyVoltage,VA+4.
75Vto5.
5VDigitalI/OSupplyVoltage,VIO+2.
7Vto5.
5VFullScaleInputRange,VIN±VREF/PGAReferenceVoltage,VREF+0.
5VtoVATMIN=–40°CTemperatureRangeforElectricalCharacteristicsTMAX=+150°COperatingTemperatureRange–40°C≤TA≤+150°CJunctiontoAmbientThermalResistance(θJA)(1)41°C/W(1)ThemaximumpowerdissipationisafunctionofTJ(MAX)ANDθJA.
ThemaximumallowablepowerdissipationatanyambienttemperatureisPD=(TJ(MAX)-TA)/θJA.
Copyright2013–2014,TexasInstrumentsIncorporated5LMP90080-Q1ZHCSC22A–MAY2013–REVISEDJANUARY2014www.
ti.
com.
cnElectricalCharacteristicsUnlessotherwisenoted,thekeyfortheconditionis(VA=VIO=VREF)/ODR(SPS)/buffer/calibration/gain.
BoldfacelimitsapplyforTMIN≤TA≤TMAX;thetypicalvaluesapplyforTA=+25°C.
SymbolParameterConditionsMinTypMaxUnitsnResolution16BitsEffectiveNumber5V/all/ON/OFF/all.
Shortedinput.
ENOB/ofBitsandNoiseSeeTable1BitsNFRFreeResolutionODROutputDataRates1.
6675See214.
6SPSGainFGA*PGA1SeeTable1128IntegralNon-5V/214.
65/ON/ON/1-128INL±1LSBLinearity(1)TotalNoise5V/all/ON/OFF/all.
Shortedinput.
SeeTable2VBelowNoise5V/all/ONorOFF/ON/allVFloor(rms)OEOffsetError5V/214.
65/ON/ON/11.
7915V5V/214.
65/ON/ON/1280.
011210V5V/214.
65/ONorOFF/OFF/1-8100nV/°C5V/214.
65/ON/ON/1-83nV/°C5V/214.
65/ON/OFF/1625nV/°COffsetDriftOverTemp(1)5V/214.
65/ON/ON/160.
4nV/°C5V/214.
65/ON/OFF/1286nV/°C5V/214.
65/ON/ON/1280.
125nV/°CnV/10005V/214.
65/ON/OFF/1,TA=150°C2360hoursOffsetDriftoverTime(1)nV/10005V/214.
65/ON/ON/1,TA=150°C100hours5V/214.
65/ON/ON/1-80780ppm5V/214.
65/ON/ON/1650ppmGEGainError(1)5V/214.
65/ON/ON/6450ppm5V/214.
65/ON/ON/128100ppmGainDriftover5V/214.
65/ON/ON/all0.
5ppm/°CTemp(1)ppm/10005V/214.
65/ON/OFF/1,TA=150°C5.
9hoursGainDriftoverTime(1)ppm/10005V/214.
65/ON/ON/1,TA=150°C1.
6hoursCONVERTER'SCHARACTERISTICInputCommonDC,5V/214.
65/ON/ON/190120dBCMRRModeRejection50/60Hz,5V/214.
65/OFF/OFF/1117dBRatioReferenceCommonModeVREF=2.
5V101dBRejectionPowerSupplyPSRRDC,5V/214.
65/ON/ON/185112dBRejectionRatioNormalMode47Hzto63Hz,5V/13.
42/OFF/OFFNMRR78dBRejectionRatio(1)/1Cross-talk(1)5V/214.
65/OFF/OFF/195143dBPOWERSUPPLYCHARACTERISTICSAnalogSupplyVA4.
755.
05.
5VVoltageDigitalSupplyVIO2.
73.
35.
5VVoltage(1)Thisparameterisspecifiedbydesignand/orcharacterizationandisnottestedinproduction.
6Copyright2013–2014,TexasInstrumentsIncorporatedLMP90080-Q1www.
ti.
com.
cnZHCSC22A–MAY2013–REVISEDJANUARY2014ElectricalCharacteristics(continued)Unlessotherwisenoted,thekeyfortheconditionis(VA=VIO=VREF)/ODR(SPS)/buffer/calibration/gain.
BoldfacelimitsapplyforTMIN≤TA≤TMAX;thetypicalvaluesapplyforTA=+25°C.
SymbolParameterConditionsMinTypMaxUnits5V/13.
42/OFF/OFF/1,ext.
CLK464700A5V/13.
42/ON/OFF/64,ext.
CLK6901000A5V/214.
65/ON/OFF/64,int.
CLK17602150AAnalogSupplyIVA5V/214.
65/OFF/OFF/1,int.
CLK9411250ACurrentStandby,5V,int.
CLK540AStandby,5V,ext.
CLK300APower-down,5V,int/extCLK4.
640AREFERENCEINPUTVREFPPositiveReferenceVREFN+0.
5VAVNegativeVREFNGNDVREFP-0.
5VReferenceDifferentialVREFVREF=VREFP-VREFN0.
5VAVReferenceReferenceZREFVREF=3V/13.
42/OFF/OFF/110MOhmImpedanceVREF=3V/13.
42/ONorOFF/ONorIREFReferenceInput±2AOFF/allCapacitanceoftheCREFPgain=1(2)6pFPositiveReferenceCapacitanceoftheCREFNNegativegain=1(2)6pFReferenceReferenceILREFPower-down1nALeakageCurrentANALOGINPUTGain=1-8,bufferONGND+0.
1VA-0.
1VVINPPositiveInputGain=16-128,bufferONGND+0.
4VA-1.
5VGain=1-8,bufferOFFGNDVAVGain=1-8,bufferONGND+0.
1VA-0.
1VVINNNegativeInputGain=16-128,bufferONGND+0.
4VA-1.
5VGain=1-8,bufferOFFGNDVAVVINDifferentialInputVIN=VINP-VINN±VREF/PGADifferentialInputZINODR=13.
42SPS15.
4MOhmImpedanceCapacitanceofthe5V/214.
65/OFF/OFF/1CINP4pFPositiveInputCapacitanceoftheCINN5V/214.
65/OFF/OFF/14pFNegativeInput5V/13.
42/ON/OFF/1-8500pAInputLeakageIINCurrent5V/13.
42/ON/OFF/16-128100pADIGITALINPUTCHARACTERISTICSatVA=VIO=VREF=3.
0VLogical"1"InputVIH0.
7xVIOVVoltageLogical"0"InputVIL0.
3xVIOVVoltageDigitalInputIIL-10+10ALeakageCurrentDigitalInputVHYST0.
1xVIOVHysteresis(2)Thisparameterisspecifiedbydesignand/orcharacterizationandisnottestedinproduction.
Copyright2013–2014,TexasInstrumentsIncorporated7LMP90080-Q1ZHCSC22A–MAY2013–REVISEDJANUARY2014www.
ti.
com.
cnElectricalCharacteristics(continued)Unlessotherwisenoted,thekeyfortheconditionis(VA=VIO=VREF)/ODR(SPS)/buffer/calibration/gain.
BoldfacelimitsapplyforTMIN≤TA≤TMAX;thetypicalvaluesapplyforTA=+25°C.
SymbolParameterConditionsMinTypMaxUnitsDIGITALOUTPUTCHARACTERISTICSatVA=VIO=VREF=3.
0VLogical"1"OutputVOHSource300A2.
6VVoltageLogical"0"OutputVOLSink300A0.
4VVoltageIOZH,TRI-STATE-1010AIOZLLeakageCurrentTRI-STATECOUTSee(2)5pFCapacitanceEXCITATIONCURRENTSOURCESCHARACTERISTICS0,100,200,ExcitationCurrent300,400,500,IB1,IB2ASourceOutput600,700,800,900,1000IB1/IB2ToleranceVA=VREF=5V-50.
25%IB1/IB2OutputVA=5.
0V,IB1/IB2=100Ato1000VA-0.
8VComplianceRangeAVA=5.
0V,IB1/IB2=100Ato1000IB1/IB2Regulation0.
07%/VAIBTCIB1/IB2DriftVA=5.
0V60ppm/°C5V/214.
65/OFF/OFF/1,IB1/IB2=0.
341.
53%100A5V/214.
65/OFF/OFF/1,IB1/IB2=0.
221%200A5V/214.
65/OFF/OFF/1,IB1/IB2=0.
20.
85%300A5V/214.
65/OFF/OFF/1,IB1/IB2=0.
150.
8%400A5V/214.
65/OFF/OFF/1,IB1/IB2=0.
140.
7%500AIBMTIB1/IB2Matching5V/214.
65/OFF/OFF/1,IB1/IB2=0.
130.
7%600A5V/214.
65/OFF/OFF/1,IB1/IB2=0.
0750.
65%700A5V/214.
65/OFF/OFF/1,IB1/IB2=0.
0850.
6%800A5V/214.
65/OFF/OFF/1,IB1/IB2=0.
110.
55%900A5V/214.
65/OFF/OFF/1,IB1/IB2=0.
110.
45%1000AIB1/IB2MatchingVA=5.
0V,IB1/IB2=100Ato1000IBMTC2ppm/°CDrfitAINTERNAL/EXTERNALCLKInternalClockCLKIN893kHzFrequencyExternalClockCLKEXTSee(3)1.
83.
57177.
2MHzFrequencyInputLowVoltage0VInputHighVoltage1VExternalCrystalFrequencyFrequency1.
83.
57177.
2MHzStart-uptime7ms(3)Thisparameterisspecifiedbydesignand/orcharacterizationandisnottestedinproduction.
8Copyright2013–2014,TexasInstrumentsIncorporatedLMP90080-Q1www.
ti.
com.
cnZHCSC22A–MAY2013–REVISEDJANUARY2014ElectricalCharacteristics(continued)Unlessotherwisenoted,thekeyfortheconditionis(VA=VIO=VREF)/ODR(SPS)/buffer/calibration/gain.
BoldfacelimitsapplyforTMIN≤TA≤TMAX;thetypicalvaluesapplyforTA=+25°C.
SymbolParameterConditionsMinTypMaxUnitsSCLKSerialClock10MHzTable1.
ENOB(NoiseFreeResolution)vs.
SamplingRateandGainatVA=VIO=VREF=5VGainoftheADCSPS12481632641281.
677516(16)16(16)16(16)16(16)16(16)16(16)16(16)16(16)3.
35516(16)16(16)16(16)16(16)16(16)16(16)16(16)16(15.
5)6.
7116(16)16(16)16(16)16(16)16(16)16(16)16(16)16(15)13.
4216(16)16(16)16(16)16(16)16(16)16(16)16(15.
5)16(15)26.
8312516(16)16(16)16(16)16(16)16(16)16(16)16(16)16(15.
5)53.
662516(16)16(16)16(16)16(16)16(16)16(16)16(16)16(15)107.
32516(16)16(16)16(16)16(16)16(16)16(16)16(15.
5)16(14.
5)214.
6516(16)16(16)16(16)16(16)16(16)16(16)16(15)16(14)Table2.
RMSNoise(V)vs.
SamplingRateandGainatVA=VIO=VREF=5VGainoftheADCSPS12481632641281.
67752.
681.
651.
241.
000.
220.
190.
170.
163.
3553.
862.
361.
781.
470.
340.
270.
220.
226.
715.
233.
492.
472.
090.
440.
340.
300.
3213.
427.
945.
013.
742.
940.
610.
500.
450.
4326.
831252.
901.
861.
341.
080.
290.
240.
230.
2353.
66254.
112.
601.
901.
500.
390.
350.
320.
31107.
3255.
743.
722.
722.
110.
560.
480.
460.
44214.
658.
255.
313.
822.
970.
790.
680.
640.
63Copyright2013–2014,TexasInstrumentsIncorporated9LMP90080-Q1ZHCSC22A–MAY2013–REVISEDJANUARY2014www.
ti.
com.
cnTimingDiagramsUnlessotherwisenoted,specifiedlimitsapplyforVA=5V,VIO=3.
0V.
BoldfacelimitsapplyforTMIN≤TA≤TMAX;thetypicalvaluesapplyforTA=+25°C.
Figure3.
TimingDiagramSymbolParameterConditionsMinTypicalMaxUnitsfSCLK10MHztCHSCLKHightime0.
4/fSCLKnstCLSCLKLowtime0.
4/fSCLKnsSymbolParameterConditionsMinTypicalMaxUnitstCSSUCSBSetuptimepriortoanSCLKrisingedge10nstCSHCSBHoldtimeafterthelastrisingedgeofSCLK10ns10Copyright2013–2014,TexasInstrumentsIncorporatedLMP90080-Q1www.
ti.
com.
cnZHCSC22A–MAY2013–REVISEDJANUARY2014SymbolParameterConditionsMinTypicalMaxUnitstCLKRSCLKRisetime1.
15nstCLKFSCLKFalltime1.
15nstDISUSDISetuptimepriortoanSCLKrisingedge10nstDIHSDIHoldtimeafteranSCLKrisingedge10nsSymbolParameterConditionsMinTypicalMaxUnitstDOASDOAccesstimeafteranSCLKfallingedge35nstDOHSDOHoldtimeafteranSCLKfallingedge0nstDOD1SDODisabletimeaftertherisingedgeofCSB5nsSymbolParameterConditionsMinTypicalMaxUnitstDOD2SDODisabletimeaftereitheredgeofSCLK27nsSymbolParameterConditionsMinTypicalMaxUnitsSDOEnabletimefromthefallingtDOE35nsedgeofthe8thSCLKtDORSDORisetimeSee(1)7nstDOFSDOFalltimeSee(1)7nsODR≤13.
42SPS64sDataReadyBarpulseateverytDRDYB1/ODRsecond13.
421.
2*VREF/GAIN)0x3:Themodulatorwasover-ranged(VIN<-1.
2*VREF/GAIN)[2:0]SAMPLED_CHChannelNumber–thesampledchannelforADC_DOUTandSENDIAG_FLAGS.
SPIRegistersTable26.
SPI_HANDSHAKECNSPIHandshakeControl(Address0x01)BitBitSymbolBitDescription[7:4]Reserved-SDO/DRDYBDriver–setswhoisdrivingtheSDO/DRYBpinWheneverCSBisWheneverCSBisAssertedandtheDeviceAssertedandtheDeviceCSBisDeassertedisNotReadingisReadingADC_DOUTADC_DOUT[3:1]SDO_DRDYB_DRIVER0x0(default)SDOisdrivingDRDYBisdrivingHigh-Z0x3SDOisdrivingDRDYBisdrivingDRDYBisdriving0x4SDOisdrivingHigh-ZHigh-ZOthersForbiddenSwitch-offtrigger-referstotheswitchingoftheoutputdrivefromtheslavetothemaster.
0(default):SDOwillbehigh-Zafterthelast(16th,24th,32nd,etc)risingedgeofSCLK.
Thisoptionallowstimefortheslavetotransfercontrolbacktothemasterattheendoftheframe.
0SW_OFF_TRG1:SDO'shigh-Zispostponedtothesubsequentfallingedgefollowingthelast(16th,24th,32nd,etc)risingedgeofSCLK.
Thisoptionprovidesadditionalholdtimeforthelastbit,DB0,innon-streamingreadtransfers.
Table27.
SPI_STREAMCNSPIStreamingControl(Address0x03)BitBitSymbolBitDescriptionStreamtype7STRM_TYPE0(default):NormalStreamingmode1:ControlledStreamingmodeStreamrange–selectsRangeforControlledStreamingmode[6:0]STRM_RANGEDefault:0x0054Copyright2013–2014,TexasInstrumentsIncorporatedLMP90080-Q1www.
ti.
com.
cnZHCSC22A–MAY2013–REVISEDJANUARY2014Table28.
DATA_ONLY_1DataOnlyReadControl1(Address0x09)BitBitSymbolBitDescription7Reserved-StartaddressfortheDataOnlyReadTransaction[6:0]DATA_ONLY_ADRDefault:0x1APleaserefertothedescriptionofDT_ONLY_SZinTable29register.
Table29.
DATA_ONLY_2DataOnlyReadControl2(Address0x0A)BitBitSymbolBitDescription[7:3]Reserved-[2:0]NumberofbytestobereadoutinDataOnlymode.
Avalueof0x0meansreadonebyteand0x7meansread8bytes.
DATA_ONLY_SZDefault:0x2Table30.
SPI_DRDYBCNSPIDataReadyBarControl(Address0x11)BitBitSymbolBitDescriptionEnableDRDYBonD67SPI_DRDYB_D60(default):D6isaGPIO1:D6=drdybsignal6Reserved-CRCReset5CRC_RST0(default):EnableCRCresetonDRDYBdeassertion1:DisbaleCRCresetonDRDYBdeassertion4Reserved-Gainbackgroundcalibration0(default):CorrectFGAgainerror.
ThisisusefulonlyifthedeviceisoperatinginBgcalMode23FGA_BGCALandScanMode2orScanMode3.
1:CorrectFGAgainerrorusingthelastknowncoefficients.
[2:0]ReservedDefault-0x3(donotchangethisvalue)Table31.
SPI_CRC_CNCRCControl(Address0x13)BitBitSymbolBitDescription[7:5]Reserved-EnableCRC4EN_CRC0(default):DisableCRC1:EnableCRC3ReservedDefault-0x0(donotchangethisvalue)DRDYBAfterCRC2DRDYB_AFT_CRC0(default):DRDYBisdeasserted(activehigh)afterADC_DOUTLisread.
1:DRDYBisdeassertedafterSPI_CRC_DAT(whichfollowsADC_DOUTL),isread.
[1:0]Reserved-Copyright2013–2014,TexasInstrumentsIncorporated55LMP90080-Q1ZHCSC22A–MAY2013–REVISEDJANUARY2014www.
ti.
com.
cnTable32.
SPI_CRC_DATCRCData(Address0x1D)BitBitSymbolBitDescriptionCRCDataWhenwritten,thisregisterresetCRC:[7:0]CRC_DATAnyValue:ResetCRCWhenread,thisregisterindicatestheCRCdata.
GPIORegistersTable33.
GPIO_DIRCNGPIODirection(Address0x0E)BitBitSymbolBitDescription7Reserved-GPIOdirectioncontrol–thesebitsareusedtocontrolthedirectionofeachGeneralPurposeInput/Outputs(GPIO)pinsD0-D6.
0(default):DxisanInputxGPIO_DIRCNx1:DxisanOutputwhere0≤x≤6Forexample,writinga1tobit6meansD6isanOutput.
(1)(1)IfD6isusedforDRDYB,thenitcannotbeusedforGPIO.
Table34.
GPIO_DATGPIOData(Address0x0F)BitBitSymbolBitDescription7Reserved-WriteOnly-whenGPIO_DIRCNx=00:DxisLO1:DxisHIReadOnly-whenGPIO_DIRCNx=10:DxdrivenLO1:DxdrivenHIxDxwhere0≤x≤6Forexample,writinga0tobit4meansD4isLO.
ItisokaytoReadtheGPIOsthatareconfiguredasoutputsandwritetoGPIOsthatareconfiguredasinputs.
ReadingtheGPIOsthatareoutputswouldreturnthecurrentvalueonthoseGPIOs,andwritingtotheGPIOsthatareinputsareneglected.
56Copyright2013–2014,TexasInstrumentsIncorporatedLMP90080-Q1www.
ti.
com.
cnZHCSC22A–MAY2013–REVISEDJANUARY2014REVISIONHISTORYChangesfromRevision(May2013)toRevisionAPageDeletedCH_STSandADC_DOUTMfromthesentence:ComputetheCRCexternally.
37AddedsentencetotheendoftheRESETandRESTARTsection38Copyright2013–2014,TexasInstrumentsIncorporated57PACKAGEOPTIONADDENDUMwww.
ti.
com2-Dec-2016Addendum-Page1PACKAGINGINFORMATIONOrderableDeviceStatus(1)PackageTypePackageDrawingPinsPackageQtyEcoPlan(2)Lead/BallFinish(6)MSLPeakTemp(3)OpTemp(°C)DeviceMarking(4/5)SamplesLMP90080QMH/NOPBACTIVEHTSSOPPWP2848Green(RoHS&noSb/Br)CUSNLevel-3-260C-168HR-40to150LMP90080QMHLMP90080QMHE/NOPBACTIVEHTSSOPPWP28250Green(RoHS&noSb/Br)CUSNLevel-3-260C-168HR-40to150LMP90080QMHLMP90080QMHX/NOPBACTIVEHTSSOPPWP282500Green(RoHS&noSb/Br)CUSNLevel-3-260C-168HR-40to150LMP90080QMH(1)Themarketingstatusvaluesaredefinedasfollows:ACTIVE:Productdevicerecommendedfornewdesigns.
LIFEBUY:TIhasannouncedthatthedevicewillbediscontinued,andalifetime-buyperiodisineffect.
NRND:Notrecommendedfornewdesigns.
Deviceisinproductiontosupportexistingcustomers,butTIdoesnotrecommendusingthispartinanewdesign.
PREVIEW:Devicehasbeenannouncedbutisnotinproduction.
Samplesmayormaynotbeavailable.
OBSOLETE:TIhasdiscontinuedtheproductionofthedevice.
(2)EcoPlan-Theplannedeco-friendlyclassification:Pb-Free(RoHS),Pb-Free(RoHSExempt),orGreen(RoHS&noSb/Br)-pleasecheckhttp://www.
ti.
com/productcontentforthelatestavailabilityinformationandadditionalproductcontentdetails.
TBD:ThePb-Free/Greenconversionplanhasnotbeendefined.
Pb-Free(RoHS):TI'sterms"Lead-Free"or"Pb-Free"meansemiconductorproductsthatarecompatiblewiththecurrentRoHSrequirementsforall6substances,includingtherequirementthatleadnotexceed0.
1%byweightinhomogeneousmaterials.
Wheredesignedtobesolderedathightemperatures,TIPb-Freeproductsaresuitableforuseinspecifiedlead-freeprocesses.
Pb-Free(RoHSExempt):ThiscomponenthasaRoHSexemptionforeither1)lead-basedflip-chipsolderbumpsusedbetweenthedieandpackage,or2)lead-baseddieadhesiveusedbetweenthedieandleadframe.
ThecomponentisotherwiseconsideredPb-Free(RoHScompatible)asdefinedabove.
Green(RoHS&noSb/Br):TIdefines"Green"tomeanPb-Free(RoHScompatible),andfreeofBromine(Br)andAntimony(Sb)basedflameretardants(BrorSbdonotexceed0.
1%byweightinhomogeneousmaterial)(3)MSL,PeakTemp.
-TheMoistureSensitivityLevelratingaccordingtotheJEDECindustrystandardclassifications,andpeaksoldertemperature.
(4)Theremaybeadditionalmarking,whichrelatestothelogo,thelottracecodeinformation,ortheenvironmentalcategoryonthedevice.
(5)MultipleDeviceMarkingswillbeinsideparentheses.
OnlyoneDeviceMarkingcontainedinparenthesesandseparatedbya"~"willappearonadevice.
IfalineisindentedthenitisacontinuationofthepreviouslineandthetwocombinedrepresenttheentireDeviceMarkingforthatdevice.
(6)Lead/BallFinish-OrderableDevicesmayhavemultiplematerialfinishoptions.
Finishoptionsareseparatedbyaverticalruledline.
Lead/BallFinishvaluesmaywraptotwolinesifthefinishvalueexceedsthemaximumcolumnwidth.
ImportantInformationandDisclaimer:TheinformationprovidedonthispagerepresentsTI'sknowledgeandbeliefasofthedatethatitisprovided.
TIbasesitsknowledgeandbeliefoninformationprovidedbythirdparties,andmakesnorepresentationorwarrantyastotheaccuracyofsuchinformation.
Effortsareunderwaytobetterintegrateinformationfromthirdparties.
TIhastakenandPACKAGEOPTIONADDENDUMwww.
ti.
com2-Dec-2016Addendum-Page2continuestotakereasonablestepstoproviderepresentativeandaccurateinformationbutmaynothaveconducteddestructivetestingorchemicalanalysisonincomingmaterialsandchemicals.
TIandTIsuppliersconsidercertaininformationtobeproprietary,andthusCASnumbersandotherlimitedinformationmaynotbeavailableforrelease.
InnoeventshallTI'sliabilityarisingoutofsuchinformationexceedthetotalpurchasepriceoftheTIpart(s)atissueinthisdocumentsoldbyTItoCustomeronanannualbasis.
OTHERQUALIFIEDVERSIONSOFLMP90080-Q1:Catalog:LMP90080NOTE:QualifiedVersionDefinitions:Catalog-TI'sstandardcatalogproductTAPEANDREELINFORMATION*AlldimensionsarenominalDevicePackageTypePackageDrawingPinsSPQReelDiameter(mm)ReelWidthW1(mm)A0(mm)B0(mm)K0(mm)P1(mm)W(mm)Pin1QuadrantLMP90080QMHE/NOPBHTSSOPPWP28250178.
016.
46.
810.
21.
68.
016.
0Q1LMP90080QMHX/NOPBHTSSOPPWP282500330.
016.
46.
810.
21.
68.
016.
0Q1PACKAGEMATERIALSINFORMATIONwww.
ti.
com20-Sep-2016PackMaterials-Page1*AlldimensionsarenominalDevicePackageTypePackageDrawingPinsSPQLength(mm)Width(mm)Height(mm)LMP90080QMHE/NOPBHTSSOPPWP28250210.
0185.
035.
0LMP90080QMHX/NOPBHTSSOPPWP282500367.
0367.
038.
0PACKAGEMATERIALSINFORMATIONwww.
ti.
com20-Sep-2016PackMaterials-Page2www.
ti.
comPACKAGEOUTLINECTYP6.
66.
21.
1MAX26X0.
6528X0.
300.
192X8.
45TYP0.
200.
090-80.
100.
025.
655.
253.
152.
75(1)0.
25GAGEPLANE0.
70.
5ANOTE39.
89.
6BNOTE44.
54.
34214870/A10/2014PowerPAD-1.
1mmmaxheightPWP0028APLASTICSMALLOUTLINENOTES:1.
Alllineardimensionsareinmillimeters.
Anydimensionsinparenthesisareforreferenceonly.
DimensioningandtolerancingperASMEY14.
5M.
2.
Thisdrawingissubjecttochangewithoutnotice.
3.
Thisdimensiondoesnotincludemoldflash,protrusions,orgateburrs.
Moldflash,protrusions,orgateburrsshallnotexceed0.
15mm,perside.
4.
Thisdimensiondoesnotincludeinterleadflash.
Interleadflashshallnotexceed0.
25mm,perside.
5.
ReferenceJEDECregistrationMO-153,variationAET.
PowerPADisatrademarkofTexasInstruments.
TM1280.
1CAB1514PIN1IDAREASEATINGPLANE0.
1CSEEDETAILADETAILATYPICALSCALE1.
800THERMALPADwww.
ti.
comEXAMPLEBOARDLAYOUT0.
05MAXALLAROUND0.
05MINALLAROUND28X(1.
3)(6.
1)28X(0.
45)(0.
9)TYP28X(1.
5)28X(0.
45)26X(0.
65)(3)(3.
4)NOTE9(5.
5)SOLDERMASKOPENING(9.
7)(1.
3)(1.
3)TYP(5.
8)()TYPVIA0.
2(0.
65)TYP4214870/A10/2014PowerPAD-1.
1mmmaxheightPWP0028APLASTICSMALLOUTLINESOLDERMASKDEFINEDPADLANDPATTERNEXAMPLESCALE:6XHV/ISOLATIONOPTION0.
9CLEARANCECREEPAGEOTHERDIMENSIONSIDENTICALTOIPC-7351TMNOTES:(continued)6.
PublicationIPC-7351mayhavealternatedesigns.
7.
Soldermasktolerancesbetweenandaroundsignalpadscanvarybasedonboardfabricationsite.
8.
Thispackageisdesignedtobesolderedtoathermalpadontheboard.
Formoreinformation,seeTexasInstrumentsliteraturenumbersSLMA002(www.
ti.
com/lit/slma002)andSLMA004(www.
ti.
com/lit/slma004).
9.
Sizeofmetalpadmayvaryduetocreepagerequirement.
METALSOLDERMASKOPENINGNONSOLDERMASKDEFINEDSOLDERMASKDETAILSSOLDERMASKOPENINGMETALUNDERSOLDERMASKSOLDERMASKDEFINEDSYMMSYMMSEEDETAILS1141528METALCOVEREDBYSOLDERMASKSOLDERMASKOPENINGIPC-7351NOMINAL0.
65CLEARANCECREEPAGEwww.
ti.
comEXAMPLESTENCILDESIGN28X(1.
3)28X(0.
45)(6.
1)28X(1.
5)28X(0.
45)26X(0.
65)(3)(5.
5)BASEDON0.
127THICKSTENCIL(5.
8)4214870/A10/2014PowerPAD-1.
1mmmaxheightPWP0028APLASTICSMALLOUTLINE2.
66X4.
770.
1782.
88X5.
160.
1523.
0X5.
5(SHOWN)0.
1273.
55X6.
370.
1SOLDERSTENCILOPENINGSTENCILTHICKNESSSEETABLEFORDIFFERENTOPENINGSFOROTHERSTENCILTHICKNESSESNOTES:(continued)10.
Lasercuttingapertureswithtrapezoidalwallsandroundedcornersmayofferbetterpasterelease.
IPC-7525mayhavealternatedesignrecommendations.
11.
Boardassemblysitemayhavedifferentrecommendationsforstencildesign.
TMSOLDERPASTEEXAMPLEEXPOSEDPAD100%PRINTEDSOLDERCOVERAGEAREASCALE:6XHV/ISOLATIONOPTION0.
9CLEARANCECREEPAGEOTHERDIMENSIONSIDENTICALTOIPC-7351SYMMSYMM1141528BASEDON0.
127THICKSTENCILBYSOLDERMASKMETALCOVEREDIPC-7351NOMINAL0.
65CLEARANCECREEPAGE重重要要声声明明德州仪器(TI)及其下属子公司有权根据JESD46最新标准,对所提供的产品和服务进行更正、修改、增强、改进或其它更改,并有权根据JESD48最新标准中止提供任何产品和服务.
客户在下订单前应获取最新的相关信息,并验证这些信息是否完整且是最新的.
所有产品的销售都遵循在订单确认时所提供的TI销售条款与条件.
TI保证其所销售的组件的性能符合产品销售时TI半导体产品销售条件与条款的适用规范.
仅在TI保证的范围内,且TI认为有必要时才会使用测试或其它质量控制技术.
除非适用法律做出了硬性规定,否则没有必要对每种组件的所有参数进行测试.
TI对应用帮助或客户产品设计不承担任何义务.
客户应对其使用TI组件的产品和应用自行负责.
为尽量减小与客户产品和应用相关的风险,客户应提供充分的设计与操作安全措施.
TI不对任何TI专利权、版权、屏蔽作品权或其它与使用了TI组件或服务的组合设备、机器或流程相关的TI知识产权中授予的直接或隐含权限作出任何保证或解释.
TI所发布的与第三方产品或服务有关的信息,不能构成从TI获得使用这些产品或服务的许可、授权、或认可.
使用此类信息可能需要获得第三方的专利权或其它知识产权方面的许可,或是TI的专利权或其它知识产权方面的许可.
对于TI的产品手册或数据表中TI信息的重要部分,仅在没有对内容进行任何篡改且带有相关授权、条件、限制和声明的情况下才允许进行复制.
TI对此类篡改过的文件不承担任何责任或义务.
复制第三方的信息可能需要服从额外的限制条件.
在转售TI组件或服务时,如果对该组件或服务参数的陈述与TI标明的参数相比存在差异或虚假成分,则会失去相关TI组件或服务的所有明示或暗示授权,且这是不正当的、欺诈性商业行为.
TI对任何此类虚假陈述均不承担任何责任或义务.
客户认可并同意,尽管任何应用相关信息或支持仍可能由TI提供,但他们将独力负责满足与其产品及在其应用中使用TI产品相关的所有法律、法规和安全相关要求.
客户声明并同意,他们具备制定与实施安全措施所需的全部专业技术和知识,可预见故障的危险后果、监测故障及其后果、降低有可能造成人身伤害的故障的发生机率并采取适当的补救措施.
客户将全额赔偿因在此类安全关键应用中使用任何TI组件而对TI及其代理造成的任何损失.
在某些场合中,为了推进安全相关应用有可能对TI组件进行特别的促销.
TI的目标是利用此类组件帮助客户设计和创立其特有的可满足适用的功能安全性标准和要求的终端产品解决方案.
尽管如此,此类组件仍然服从这些条款.
TI组件未获得用于FDAClassIII(或类似的生命攸关医疗设备)的授权许可,除非各方授权官员已经达成了专门管控此类使用的特别协议.
只有那些TI特别注明属于军用等级或"增强型塑料"的TI组件才是设计或专门用于军事/航空应用或环境的.
购买者认可并同意,对并非指定面向军事或航空航天用途的TI组件进行军事或航空航天方面的应用,其风险由客户单独承担,并且由客户独力负责满足与此类使用相关的所有法律和法规要求.
TI已明确指定符合ISO/TS16949要求的产品,这些产品主要用于汽车.
在任何情况下,因使用非指定产品而无法达到ISO/TS16949要求,TI不承担任何责任.
产产品品应应用用数字音频www.
ti.
com.
cn/audio通信与电信www.
ti.
com.
cn/telecom放大器和线性器件www.
ti.
com.
cn/amplifiers计算机及周边www.
ti.
com.
cn/computer数据转换器www.
ti.
com.
cn/dataconverters消费电子www.
ti.
com/consumer-appsDLP产品www.
dlp.
com能源www.
ti.
com/energyDSP-数字信号处理器www.
ti.
com.
cn/dsp工业应用www.
ti.
com.
cn/industrial时钟和计时器www.
ti.
com.
cn/clockandtimers医疗电子www.
ti.
com.
cn/medical接口www.
ti.
com.
cn/interface安防应用www.
ti.
com.
cn/security逻辑www.
ti.
com.
cn/logic汽车电子www.
ti.
com.
cn/automotive电源管理www.
ti.
com.
cn/power视频和影像www.
ti.
com.
cn/video微控制器(MCU)www.
ti.
com.
cn/microcontrollersRFID系统www.
ti.
com.
cn/rfidsysOMAP应用处理器www.
ti.
com/omap无线连通性www.
ti.
com.
cn/wirelessconnectivity德州仪器在线技术支持社区www.
deyisupport.
comIMPORTANTNOTICEMailingAddress:TexasInstruments,PostOfficeBox655303,Dallas,Texas75265Copyright2016,TexasInstrumentsIncorporated